LS1LT1 Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
807 Posts
Discussion Starter · #1 ·
I am planning on replacing my throttle position sensor on my 96
Roadmaster wagon (lt1) . Does anyone know if any gaskets,o rings ,
or anything else will be necessary for this change? Thanks ed
 

·
Registered
Joined
·
213 Posts
I am planning on replacing my throttle position sensor on my 96
Roadmaster wagon (lt1) . Does anyone know if any gaskets,o rings ,
or anything else will be necessary for this change? Thanks ed
No, there are 2 screws that hold it in so, it unplugs and pops right out, there is a orange rubbery gasket--like thing behind the TPS in the throttle body TPS hole but, you could reuse it and a new TPS doesn't come with one....or I never had a new gasket come with one in the box.

 

·
Registered
Joined
·
1,068 Posts
Gaskets should come with your new TB. The intake to TB gasket and the gasket under the TB for the coolant pass thru piece. The orange foam TPS gasket thing can be reused. Which one are you are thinking of buying?
 

·
Registered
Joined
·
807 Posts
Discussion Starter · #4 ·
Gaskets should come with your new TB. The intake to TB gasket and the gasket under the TB for the coolant pass thru piece. The orange foam TPS gasket thing can be reused. Which one are you are thinking of buying?
I am buying the GM 17106680 ORIG EQUIP PARTS.I have always been
told to stick with GM when it comes to parts like this. What do you
suggest? ed
 

·
Registered
Joined
·
1,068 Posts
I totally misunderstood what you wrote. Sorry! Shoebox is the man. I would follow his lead.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top