[terminal_crazy]

Are there any Clearabce issues with this kit. I'm looking at 6" I Beam Rods.
I've read about small base circles cams being required, or grinding the rod bolts about 383 Stroker kits. Any other issues i should be aware of with 383 conversion.

Thanks
Mitch

 

[Fox Slaughter]

The block has to be clearanced for the 3.75" crank and the rods.

 

[bufmatmuslepants]

You do NOT need a small base circle cam. I only know of 1 build that needed that and he has a 4" stroke.

 

[terminal_crazy]

OK That's cool.

Thanks

 

[Fox Slaughter]

Better be getting a forged crank.

Aftermarket cast cranks are weaker than the stock crank.

 

[USMC]

With SCAT your machinist won't have to machine as much due in part to SCATs manufacturing process. You with be satisfied with SCAT hands down. The only thing I am not satisfied with them about is that its all off shore produced products.