LS1LT1 Forum banner


746 Views 0 Replies 1 Participant Last post by  [email protected]
fully ported Dart 225s with 2.055/1.60 valves.

heads were ran for 1k miles then had a lifter noise.

Engine was tore down and we ported the heads. They have a fresh valve job (4 angle intake, radius exhaust), mill are cleaned and ready to assemble. $700 in labor for this to be done.

The bee hive springs on heads were low on pressure so we have a new Lunati 73925K1 dbl spring kit to install ($250 in Summit).

$1700 for the fully ported heads with the new Lunati dbl springs installed.

Lloyd Elliott
[email protected]
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.