LS1LT1 Forum banner

Need help with Opti/code problem

1258 Views 1 Reply 2 Participants Last post by  ramcamz28
Ok first off I have a 97 LT1, 6 speed...First problem I had was with a missfire in #5 & #6..came to be a bad opti, replaced it with new, not a remaned unit..Then came the code P0336- Crankshaft position out of range..Now the question I have is I never had the P0336 code before the opti switch, and now after replacing out the crank position sensor with a new 1 still have the problem...Please Helpppppp
1 - 2 of 2 Posts
I have the exact same problem and the exact same car if it's a camaro and it's driving me nuts. Let me know what you find out.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.