[formula97]

So...my headliner is sagging on my 1997 Formula (dark pewter). Are there shops that fix the sagging or am I looking at a complete replacement? If replacement, is the abs lighter or heavier than stock? Checked out classic industries and not sure which gray is a better match for my interior. Thanks!!!

 

[cocobolo95]

If headliner materal & foam board that headliner attaches to is in good shape, then headliner can be reglued. Unfortunately, after 22 years foam board is probably ready to fall apart.

So new board & headliner will most likely be needed. Auto seat reupholstering shop can usually do the job.

 

[formula97]

So I checked classic industries and stockinteriors.com, both seem to have a good color match.

Which vendor makes a better headliner in terms of quality and fitment?

 

[cocobolo95]

Actually, I believe there are only 2 or 3 companies that actually make interior products. Classic & stock interiors might even source their stuff from the same manufacturer.

You might want to contact them and see who supplies their headliners. Then you can google for reviews of their products.

 

[formula97]

So...I finally had my new ABS headliner installed, and I was not too thrilled with the fitment especially around the t-top area.

I ended up saving my original headliner, had it recovered by an upholsterer and had that reinstalled.