Joined
·
3 Posts
Does anyone know if / where I can purchase a yellow silicone (Samco) engine hose kit for my 2000 Trans AM LS1? Thanks in advance!
Engine Hose Kit
Join the discussion
Recommended Reading
-
I need help identifying some parts.
LS1 | LS6 | LS2 | LS3 |LS7 Engine TechI need help identifying some parts. I bought z28 1cs car in pieces. I’m try to put it back together. If anyone can help I would have greatly appreciate it. Thank you Sent from my iPhone using Tapatalk- 4
- 352
-
No_pride · updated
-
Need help identifying vent tube
LS1 | LS6 | LS2 | LS3 |LS7 Engine TechI have a '66 C10 with a 2009 Pontiac G8 6.2 LS3. I need help identifying a tube coming off the drivers side rear engine. I assume it's a vent tube (see pic)? If so, where does it go? Thanks.- 0
- 349
-
Urgent Won’t start
LS1 | LS6 | LS2 | LS3 |LS7 Engine TechPlease help if you can. 96 firebird 6cyl. Won’t start. Just keeps cranking. Changed fuel filter, pressure check good, new new fuel pressure sensor. Car was running. Stalled out a few times. Had to sit before it would run, but only for 5 mins. Now won’t start at all. I sprayed starter fluid up in...- 3
- 377
-
Fuel system
LS1 | LS6 | LS2 | LS3 |LS7 Engine TechI have a 1999 firebird I have swapped an LM7 into. It was the 3.8 v6 prior. I have the ls1 intake on it, I have both the ls1 fuel rails and the truck fuel rails. I know the ls1 is a returnless system and I have the catch can filter piece for that as well, would it be easier to just put the...- 1
- 551
-
Question Main drive tensioner/pulley part numbers [LS1]
LS1 | LS6 | LS2 | LS3 |LS7 Engine TechHello! :) I've tried searching through the forums, but I've really had no luck in finding the schematic with part numbers for the main drive belt for the LS1. To be exact, it's a 1998 Firebird and I'd be really appreciative if someone could provide me with a picture and the part numbers for...- 4
- 794
Join now to ask and comment!