LS1LT1 Forum banner

brake calipers will not budge

942 Views 4 Replies 2 Participants Last post by  Mike94Z
I have a 94 z28. I'm changing the front brakes and I can't get the piston in the caliper to push back in. I've tried a c clamp with a block of wood and all. Still not an inch.

Any help?
1 - 5 of 5 Posts
Try opening the bleeder screw and see if that helps.
Tried that. No luck. Might have to just buy a new caliper.
Might want to replace the flexible hose to the caliper also. They sometimes collapse not letting brake fluid through. If the hoses are original, it's a good time to change.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.