LS1LT1 Forum banner
1 - 1 of 1 Posts

· 10 Second Opti Club
Joined
·
6,636 Posts
Yeah, take some pics so we know what you are working with. Might want to also find out why the pushrods broke before going further. Could be as simple as too much preload, they were flexing, or something a little more fun!

I run comp ultra pro mags nsa on arp 7/16 studs with lunati link bar lifters. My engine builders put in the pushrods but I am assuming they are thick walled. Cam is a little over .600 lift with patriot double springs. I bounce my 7k limiter from time to time and its still holding together :roflmao:Oh, and GM guide plates.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top