3 Series-2 Series
1 - 2 of 2 Posts
Joined
·
329 Posts
yeah it's really simple to install. You just take out the 10 reverse thread bolts, put the spacer between the ring gear and the posi, redo the bolts, and you're done. It's crazy how monstrous the series 2 carrier ring gears were; so thick compared to series 3.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Axle Shaft Lengths
Rear End, Axles & GearingAre there different length axle shafts? My car was involved in an accident on the driver side quarter about 10 years ago. The insurance paid to have a collision repair shop fix it. Since that time, it has appeared the driver's rear wheel sits in farther than the front wheel. I have always...- 3
- 170
-
algermilitia · updated
-
Traction Control ABS and rear axle help
Rear End, Axles & GearingI’m going to replace my driver and passenger rear axle shafts for my 97 camaro z28. My car has the option to turn traction control on and off, which I like. Is this replacement going to affect that at all? It looks like some shafts online say they come with traction control and some don’t.- 0
- 165
-
Ladybug · updated
-
Sound coming from my rear end when shifting
Rear End, Axles & GearingI've got an 06' GTO and I've been hearing a small thud when shifting, it happens in spurts after being driven a distance. Any ideas on what it might be? I see some rust on the rear axles.- 1
- 275
-
Installing new gears.
Rear End, Axles & GearingToday I installed some 3.73's in a certain formula...I took some pix & did a small write up to help people decide if they can do this themselves, or need to have a shop do it. http://www.keliente.com/gears.htm- 21
- 15K
-
How to install water pump gear
Rear End, Axles & GearingDo I need to remove the intake or just the timing cover and the bolts to the water pump gear ?- 6
- 445
-
Chue41559 · updated
Join now to ask and comment!