LS1LT1 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 42 Results
  1. Cars For Sale
    New to the forum...95 Camaro Z28 roller. Was a LT!/T56 car. Still has the LT1 short block in it. Has interior but i ran out of space for more pics. Just message if you need more info and for more pics. Tires will hold air so it can be rolled onto trailer. Thanks for looking.
    $600 USD
  2. 4th Gen F-Body
    Hi, I am building a 1995 4th gen Camaro Z28 as a daily driver weekend autocross car, I am not too focused on making crazy horsepower, my focus is more so on handling, I am at the very beginning of this project and it I am not quite familiar with the platform and am by no means a mechanic...
  3. LT1 | LT4 | L99 Engine Tech
    I'm new to the forum. Been reading for years but I can't seem to find the answers I'm looking for this time. I have a 1997 Lt1 that I just started to tear down. I'm doing a complete rebuild and I'm trying to clean things up a bit at the same time. I believe I've read all of the posts on the lt1...
  4. General Tech
    My 4L60E would hard shift when I’d pull out of anywhere and rev all of the way up to get out of 1st gear and usually would be fine but it would mess up in other gears too sometimes or would act like it didn’t wanna shift at all. So I found this guy who rebuilds transmissions and he had a fair...
  5. B-body Impala SS/Caprice
    I’m wondering if anyone has a wiring kit to take off the mechanical fan and it’s dreaded hard to find tensioner so I can run dual electric fans. I’m losing my mind trying to find a tensioner and I come across talks of “Gary’s wiring kit” but the website is no longer active.
  6. General Tech
    I'm very new to the lt1 world. I have a 94 trans am that will not get up to temp. It will run just above 160 no matter how long i drive it. It has a new 180 degree thermostat, put a temp coolant sensor in it, completely full with coolant. I bled the screw on the coolant hose and it had a steady...
  7. LT1 | LT4 | L99 Engine Tech
    Hello im new to this forum, I just did a rebuild on my lt1 because it spun the bearings and did its first start up today and starts but dies when I release the throttle sounds like its out of time when I did the timing I set crank dot to 12 and cam dot to 6 and cylinder one was at top position...
    lt1
  8. LT1 | LT4 | L99 Engine Tech
    Background: I have a 1968 Jeep M715; engine is a 1996 LT1, with a 1995 computer so it's OBD1. I use a computer to see all diagnostics. Situation: My son moved it out of the garage over Thanksgiving. When I went to move it back, it started and in reverse moved a foot then died. I started it...
  9. LT1 | LT4 | L99 Engine Tech
    Hey guys, might be a long one but I’ve been looking for help and I don’t get any email responses back from shops, nor do I really know anyone with an LT1, but here goes… I currently own a ‘94 Z with the 350 LT1 Auto that has 113k miles, car has cracked heads unfortunately so I’m looking to build...
  10. 4th Gen F-Body
    I believe I accidentally put some power steering in my brake fluid revisor, how screwed am I? I was reading online that you should replace ever rubber hose and o ring, how many are there on the break system I cant seem to find that out. Any help would be much appreciated thanks.
  11. Parts For Sale
    this is a complete drop out for sale out of a 95 z28. engine: lt1 sbe, ported heads and intake, twin 58mm throttle body, cai, 42lb injectors, long tube headers, tick hatermaker2 cam, tick hardened pushrods, morel hydraulic roller lifters, comp 1.6 roller rockers, lunati valve springs, comp guide...
    $5,500 USD
  12. LT1 | LT4 | L99 Engine Tech
    Hey All, I have a Gen II LT1 engine and transmission pulled from a 96 Impala SS that I plan on swapping into my 65 Cadillac Deville. Issue is I do not have the PCM from the car that the motor/tranny was pulled from nor the VIN. My question is, would it be possible to flash a new PCM using a VIN...
  13. Parts Wanted
    Looking for an oem/factory 1996-1997 WS6 Ram air hood (only) for my LT1 car. (not the earlier Firehawk). Preferably located in the midwest driving distance from Southeastern Wisconsin.
    $400 USD
  14. LT1 | LT4 | L99 Engine Tech
    I have a 1994 z28 and everything works fine except for after 1-5 minutes on the road after a cold start, it will, seemingly, misfire. I have no idea what could cause this. We have been having some electrical issues with the throttle body so maybe it's an air issue? We just replaced the egr valve...
  15. LT1 | LT4 | L99 Engine Tech
    I have a 97 ws6 m6, I’ve had this problem for a month now and can’t take it anymore. I can’t tap the gas without it dropping down near 500-700 rmps then bouncing back up to settle back down. I also can’t gun it because the rpms will drop and take a second or two to jump all the way to where its...
  16. General Tech
    Just changed the crank seal in the timing cover on my 95z28 but when i press the crank hub on it doesnt line up with the seal perfectly and folds one side of the seal inward any advice would be appreciated
  17. LT1 | LT4 | L99 Engine Tech
    I’m new to nitrous still and I got a 95 z28 355 I’ve build it’s bored .30 over cam roller rockers headers exhaust dry shot aeromotive 1000 fuel pump w the aeromotive fuel pressure regulator bigger injectors msd 6al rev limiter w the rest of the ignition set up I just don’t have a window switch...
  18. Cars Wanted
    LT1 has aluminum heads headers no leaks clean motor complete.. has t tops very straight rust free body.. no hood transmission rear-end interior gutted. Passenger door sold also. 140,000 on odometer. Parting out or will sell or trade whole. 1000.00 obo. Looking for a camper or RV and 63 64...
    lt1
  19. Classifieds
    Well, I have had enough. Its not fun for me anymore. So Big Red has to go. I have around 14K in this beast and the first $6500 Gets to take her home. If your interested in my 1997 LT1 WS6 and only 118000 original miles on her. I have all the repair invoices from start to present. Last Hit I...
  20. LT1 | LT4 | L99 Engine Tech
    Hey guys!! So, I’m about 25 years out of the “car” game and I’m purchasing a 94 Z28. (first car I bought out of high school) I would love to get to 1000rwhp, but would settle for 600 or 700. Haha. Just looking for some ideas of the best ways to get there… heads, cam, stroker, supercharger...
1-20 of 42 Results
Top