|Topic Review (Newest First)|
|05-27-2019 09:22 AM|
Originally Posted by cocobolo95 View Post
|05-27-2019 08:17 AM|
I still stand by my observation that something is not making good contact. It could be the printed circuit on the back of the cluster. It could be on the inside of temp gauge. Or many other places in the circuit chain.
The needles moving is common. I have a 2002 cluster in my back room. It's sitting upside down. All the gauge needles are pointing dound. If I turn it over, the needles slowly move back to where they should be.
|05-26-2019 03:23 PM|
|GillBates||I did it plugs in with pins. No chewed wires I put some electrical cleaner in the plugs. When I got the cluster out I noticed if I turn it upside down the speedometer gauge ponts down same with the other needles.|
|05-17-2019 08:20 AM|
The most likely suspect would be loose connectors on the back of cluster. Download 95 service manual @ following link. It will instruct you on how to take cluster out. My Files
Another probability is the printed circuit on back of cluster is going bad. Or the nutd attaching leads of instruments are not making good contact & need tightening.
|05-17-2019 07:34 AM|
Temp gauges works intermittently
I just bought a 95 trans am. The temp gauge went out on my way home. If I smacked the dash it would pop back up but wasn't reliable. I also noticed when I hit the dash or big bumps that all the gauges we're kinda weak like they would move a little bit. How do I fix this?