Power Antenna 98 TA
Replacing the original power antenna.
Want to know the pinout of the 3 wire connector, and if I can wire the new one in without splicing.
Go to the following link & download the 98 service manual. It will have the antenna wiring diagram. My Files
Thank you my friend.
Any suggestions on extracting the pins from the old antenna so I can solder the new leads directly to the pins?
Would prefer that rather than splicing with 3 butt connectors and shrink tubing.
Go to the link I posted and download the 94 service manual. Then go to the electrical section 8. Starting at the bottom of page 8A-5-8, there will be instructions on how to remove connector pins from the connector.
If you mess up a pin or connector shell, new ones can be bought on ebay & other internet sites.
|All times are GMT -5. The time now is 08:54 PM.|
Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright © 2005 - 2011 by LS1LT1.com