AtlantaDan AtlantaDan is offline
- 1995 LT1 Wagon. ERE 383
|10:42 AM - mschmidt33 quoted AtlantaDan in post HELP! 94Z Lack of low end torque, hesitation, stumbling!
Well, there's a great starting ...
|10:18 AM - AtlantaDan quoted mschmidt33 in post HELP! 94Z Lack of low end torque, hesitation, stumbling!
So I hooked it all up and idled...
|08:01 AM - mschmidt33 quoted AtlantaDan in post HELP! 94Z Lack of low end torque, hesitation, stumbling!
Drivers are here. Thanks guys...
|09:23 AM - AtlantaDan quoted frankmolinas in post High/Low idle
Ported heads, and intake , 58mm T...
|10:52 AM - toyinhawaii quoted AtlantaDan in post Changing out rusted injectors
Five-o-motorsports or fuelinjec...
|07:34 AM - AtlantaDan quoted cocobolo95 in post Emissions testing standards drop each year
The government can not make a 1...
|09:26 AM - AtlantaDan quoted Thomas Terry in post Lt1 tapping sound
No no I corrected myself it hover...
|09:07 AM - AtlantaDan quoted Thomas Terry in post Lt1 tapping sound
About 50 psi. That's close to wha...
|09:01 AM - AtlantaDan quoted Thomas Terry in post Lt1 tapping sound
It never exceeds 60psi. I just u...
|11:22 AM - AtlantaDan quoted Youngmattg in post What lifters and timing set to run on lt1 with the comp 292
If you're going to go to a vent...
|09:10 AM - ErikFormula quoted AtlantaDan in post What is this (pic inside)?
Coolant temp sensor for the gau...
|02:20 PM - Steve's_94_Z28 quoted AtlantaDan in post Really Need Some Help With Rockers
...p or crack. Thanks AtlantaDan, thats what has been...
|01:57 PM - AtlantaDan quoted Steve's_94_Z28 in post Really Need Some Help With Rockers
Is there any chance that the heads ...
|12:34 PM - AtlantaDan quoted sc1984 in post Can't get air injection tube from exhaust manifold
Ok. I think I understand no...
|11:56 AM - AtlantaDan quoted sc1984 in post Harmonic Balacer won't go on
Ok so this isnt a retarded ...
|12:25 PM - AtlantaDan quoted BALLSS in post Need help diagnosing grinding noise
On LT1/4 cars you need to r...
|12:24 PM - BALLSS quoted AtlantaDan in post Need help diagnosing grinding noise
Someone will undoubtedly correc...
|05:35 AM - AtlantaDan quoted lstuaan in post Fuel Injector Question
I believe you'll need a plug...
|12:41 PM - AtlantaDan quoted Dynamic396 in post tick tick tick
You can just buy mine... I'v...
|08:59 AM - bowtienut quoted AtlantaDan in post New heads, cam, and lots of other stuff. Here's a vid.
Edge suggested 3k in their "Str...