CC305 CAM FOR SALE....ChEaP!!!! SOLD

[red95lt1]

CC305 Camshaft: SOLD!


Used but in Great condition.

I recently bought this cam from a member on here by the name of "foggedz"

He had the cam in his camaro for about 3-4k miles.

I bought the cam in December of '06 and it has been sitting in the box ever since. I have decided to go with the CC503 instead, so I wont be needing this one.

The specs on the cam are .510/.510 with 1.5 rocker arms .544/.544 with 1.6 rocker arms. Duration is 220/230, and its on a 114 LSA. I still have the original cam card that I can send with the cam.


Thunder racing sells the cam for $247

I will sell it for $100 plus shipping

PICS:





http://i69.photobucket.com/albums/i42/joeywns/Picture_057-1.jpg
http://i69.photobucket.com/albums/i42/joeywns/Picture_054-1.jpg
http://i69.photobucket.com/albums/i42/joeywns/Picture_053-1.jpg
http://i69.photobucket.com/albums/i42/joeywns/Picture_052-1.jpg
http://i69.photobucket.com/albums/i42/joeywns/Picture_057.jpg
http://i69.photobucket.com/albums/i42/joeywns/Picture_054.jpg

[red95lt1]

bump for a new day

[Grims]

is that a nick in the first picture on the center lobe?

[red95lt1]

yeah i actually had the same concern and asked the guy about it. He said it was there when he bought it brand new, it doesnt even come in contact with the lifter so its not even an issue. He had no problems with it. Let me know if you have anymore questions, thanks!

[CKJ]

That nick isn't on a lobe, thats on the cam journal itself. No hyd roller lifter after 4-5K miles is going to wear a cam that bad. Thats all cam bearing there :poke: nick + cam bearing = not good. But thats only if it has a bur that stick ups, you could kinda sand it down w/ a polishing bit though.

[red95lt1]

that nic was on the cam when the guy bought it from comp cams straight from the factory. he put it in his car for 4-5k and everything was fine. bump :)

[red95lt1]

cam is sold, mods can delete this thread. thanks!