12.7s?

[Scott Anderson]

Wondering if my goal time is realistic for these mods. Yes, I know these thread get old, sorry.

Pacesetter Lts w/ Y ---> cutout.
LPE CAI
Free mods
3.42 gears
Fuddle 3k stall
FULL STREET TRIM!!!!!

Are 12.7s possible? And what mph should I expect? 103?

[Scott Anderson]

also, PCM for less tune

and car is in sig

[NviouSS]

have you ran before this?

[Scott Anderson]

Not in this car.

Just wondering if the setup will allow for it.

[NviouSS]

i'm thinking you may hit low 13's with all that. LT1's were good for high 13's out of the box right?

[CKJ]

13.3 @ 101 is my vote. It takes close to every bolt on and about 50% weight reduction to get down to 12.7 Street trim = street tires right? ...oh wait....n/m the 13.3.... 13.7 @ 100 3K stall on street tires!? wow... 13.8-14.0 @ 100 this ain't looking to good for you.

13.3 @ 101 w/ sticky tires and mods
13.8 - 14.0 @ 100 w/ street tires and mods

:dontknow:

[96lt1m6]

depending on your altitude(DA)if you are close to sea level i can see you running very low 13s.
where i am i run 13.8s - 14.2 depending on the heat,all i have is 2.5" y-pipe on the factory 96 manifolds,flowmaster 3'' in/out and a home made cai...
longtubes,3''y-pipe,cut-out-----3 maybe 4 tenths
pcm yune (madz,pcm4less etc.) 2-3 tenths more,so you 7 tenths max here in vegas you should see a 13.1-13.3 if you are at sea level take 3-4 tenths from that 12.7-12.9