PDA

View Full Version : NX intake, NXL DP system, 85mm TB

mrr23
02-13-2007, 10:48 PM
just got it in today. normally, this kit would have nozzles that go under the fuel injector. i got their LS intake that has the ports drilled into the intake for the nitrous and fuel.

the intake
http://www.stealthram.com/familypics/formula00/408/nx/intaketop.jpg

here's a close up of where the nitrous lines will go to just like if you had a nozzle.
http://www.stealthram.com/familypics/formula00/408/nx/intakenxlport.jpg

here's what it looks like inside the injector hole where the nitrous and fuel will come out
http://www.stealthram.com/familypics/formula00/408/nx/intakeport1.jpg

the underside of the intake has a 1/4" thick aluminum plate
http://www.stealthram.com/familypics/formula00/408/nx/intakebottom.jpg

inside the intake
http://www.stealthram.com/familypics/formula00/408/nx/intakeunderside.jpg

the NXL direct port kit replaces the factory LS intake fuel rails. this way, it pulls fuel right off the rails
http://www.stealthram.com/familypics/formula00/408/nx/nxl.jpg

the fuel accumulator. this helps with the initial hit of the system.
http://www.stealthram.com/familypics/formula00/nitrous/accumulator.JPG
mrr23
02-13-2007, 10:48 PM
the 85mm TB
http://www.stealthram.com/familypics/formula00/408/nx/tbfront.jpg

http://www.stealthram.com/familypics/formula00/408/nx/tbtop.jpg

http://www.stealthram.com/familypics/formula00/408/nx/tbtpsside.jpg

http://www.stealthram.com/familypics/formula00/408/nx/tbthrottleside.jpg
Chris 96 WS6
02-13-2007, 11:12 PM
Wow, that intake is really a beautiful piece. Almost a shame to install it and get it dirty.
mrr23
02-14-2007, 08:52 PM
http://stealthram.com/familypics/formula00/408/nx/assembledfrontangle.jpg

http://stealthram.com/familypics/formula00/408/nx/assembledfront.jpg

http://stealthram.com/familypics/formula00/408/nx/assembledfrontclose.jpg

http://stealthram.com/familypics/formula00/408/nx/assembledside.jpg

http://stealthram.com/familypics/formula00/408/nx/assembledside1.jpg

http://stealthram.com/familypics/formula00/408/nx/linesonintake.jpg

http://stealthram.com/familypics/formula00/408/nx/injectorinrunner.jpg
96slow6
02-15-2007, 02:43 AM
That is awesome. Thats alot of nitro.
mrr23
02-15-2007, 12:45 PM
not really. it's only set on STUN at 180 rwhp. i might set it on kill later on down the road.
mrr23
07-11-2007, 07:18 PM
started wiring the nitrous in. got the purge solenoids done up. because of the way the NX NXL nitrous system is designed, there is one inlet per fuel rail. after seeing how someone else did a dual purge, i decided to do it as well. then, i added my own touch. i added the V purge block from www.ny-trex.com . it's an aluminum block that splits the plume into two directions. also, i picked up the aluminum line to go with it. this aluminum line is bendable and doesn't kink.

V Purge Block (http://www.ny-trex.com/kits/10085.php)

yeah, a little ricer, but i'm a show off. it'll X in the middle of the windshield and spray to each side of the car.

http://stealthram.com/familypics/formula00/nitrous/dualpurge.JPG

http://stealthram.com/familypics/formula00/nitrous/dualpurgewindshield1.JPG

most likely paint these black to 'hide' them some.
http://stealthram.com/familypics/formula00/nitrous/dualpurgewindshield.JPG