*READ ME FIRST-- Tuning Documentation,VE/MAF Tuning, SES Lights + more! *08/12/05*

[baddogz28]

Thanks again to Mike Horist from LS1tech.com for this valuable tuning information!!!

Quick Links:
Learning to Tune:
--Tuner Software-Tuning 101|

http://www.ls1tech.com/forums/showthread.php?t=284479

--HP Tuners .bin Repository|

http://www.ls1tech.com/forums/showthread.php?t=190486

--Predator Tuning 101|

http://www.ls1tech.com/forums/showpost.php?p=2652650&postcount=10

Fuel Trim Cells:

--Fuel Trim Cell Discussion|

http://www.ls1tech.com/forums/showthread.php?t=125583

Injector Tuning:

--Tuning SVO Injectors|

http://www.ls1tech.com/forums/showthread.php?t=326601

--Injector Scaling Calculations|

http://www.transamws6.net/HPTuners/injectors.xls

--Injector Duty Cycle Calculations|

http://www.ls1tech.com/forums/showthread.php?t=306296

MAF and VE Tuning:

--*NEW*How the MAF Works*NEW*|

http://www.ls1tech.com/forums/showthread.php?t=363392

--MAF Table Tuning (Dialing in the MAF Table)|

http://www.ls1tech.com/forums/showthread.php?t=256989

--VE Table Cracked!|

http://www.ls1tech.com/forums/showthread.php?t=149741

--VE Table Tuning -- Now Hesitation when driving|

http://www.ls1tech.com/forums/showthread.php?t=84933

--Tuning VE via fuel trims|

http://www.ls1tech.com/forums/showthread.php?t=304025

Torque Converter/Shifting Tuning

--Torque Converter locks/unlocks after larger converter install -- FIX|

http://www.ls1tech.com/forums/showthread.php?t=162767

Idle Tuning:

--Stop drilling those Throttle Bodies!|

http://www.ls1tech.com/forums/showthread.php?t=177230

--Idle Operation Part 1|

http://www.ls1tech.com/forums/showthread.php?t=193103

--MAF and Running Airflow Tables|

http://www.ls1tech.com/forums/showthread.php?t=290064

Diagnostics/Troubleshooting/Other:

--Service Engine Soon (SES) Lookup and Diagnostics|

http://www.ls1tech.com/forums/showthread.php?t=209783

--Detailed Diagnostic Information|

http://www.ls1tech.com/forums/showthread.php?t=103710

--GM Driving Cycle (Completing OBDII tests)|

http://www.transamws6.net/HPTuners/gm_driving_cycle.txt

[84sslt1]

How do I disable or exclude the relay drivers that I'm not going to use in my swap. Is it an ignore code thing. I've seen some in flags and switches but not the air pump, canister purge. using tunerpro, Thanks, Tim

[its allgood]

looks like we over look our sponsors, like trifecta Preformance. but good info