advice on what to do first

[gn386]

just bought 94 9c1 bone stock....... needs new tranny :D who's offering a good trans to 450 hp(and reliable future goal) next part .....what are some important mods/changes need to be done? to get her into shape.....i am a recovering turbo buick owner she had to go way too fast and the money was right;) needed a family style toy lol help me out:thumbsup:

[96slow6]

just bought 94 9c1 bone stock....... needs new tranny :D who's offering a good trans to 450 hp(and reliable future goal) next part .....what are some important mods/changes need to be done? to get her into shape.....i am a recovering turbo buick owner she had to go way too fast and the money was right;) needed a family style toy lol help me out:thumbsup:
for the trany hit up a few of the sponsors and get yourself a good deal. as for the motor start with the basics. cai, exhaust, and tune. that will get you started. or are you looking for something bigger?

[gn386]

not bigger just the best in their group

[mrcadillac]

honestly, just go here and start reading some threads. good stuff. In the http://www.impalassforum.com/cgi-bin/ultimatebb.cgi?action=intro

In the Concern Section, there is a CHeap ass mod thread.

heres a good 4L60E trans guy, at a very good price. http://www.cpt4l60e.com/

[Chris 96 WS6]

Don't forget Performabuilt.com

[gn386]

didn't forget performabuilt just haven't found anyone that has had experience with them good or bad haven't seen milage or long time line of use .....they are still new on the market right?
look @ netgears they were cheap....2 years later they are gone:barf:

[snakeoilperformance]

tremec makes the t56

[mrcadillac]

look @ netgears they were cheap....2 years later they are gone:barf:

Good thing they are gone!! They were so cheap cuz they were making crappy stuff. There are Many ISSF members who would burn the shop down if Net Gearhead came back.

[LT1capriceclassic]

1.6 roller rockers, and change the rear gears that should take atleast a half second of the 1/4 mile time.

[stillsolvr]

]tremec makes the t56] :thumbsup:

snakeoilperformance has a good idea! there are 6-speed kits for the b-body. many have done it.

if you are getting the tranny done you should get a new stall converter while its out. the cheap route would be a 90's 4x4 s-10 stall. i think they flash at @ 2500. or you could do the right thing and buy a new one. i'd shoot for @ 3000 rpms. a good computer reprogram is also a good idea. gears, exhaust,grins

[Stroker396]

If you go with roller rockers get the LT4 knock module at the same time. It will likely save your some false knock headaches.