Check out the soon to come setup!!!!! what do yall think????

[ebaker]

Im about to get this from a buddy of mine. Its all brand new he was going to put it in his car but decided not to.

ENGINE:
-LME built 370
-Lunati crank
-Lunati 6.125" Pro Mod Rods
-Wiseco 25cc dish pistons
-Hell Fire Rings
-Clevite rod,main, and cam bearings
-Custom 23x/23x turbo grind Cam Motion cam
-Crane Hyd. Roller Lifters
-Roll Master double roller w/ torrington bearing and nitrided gears
-Felpro head gaskets
-TEA Stage 3 AFR 205 heads
-flow 343 cfm @ .600 lift
-same port job as heads on W2W record holding LS1 TT motor
-Jesel SS Shaft Mounted Rockers
-Comp Cams 921 springs
-105mm Accufab throttle body
-105mm Wilson Manifolds Elbow

TRANNY:
-FLT fully built 4L80E built to support 1350 RWHP
-Fuddle Extreme Heavy Duty 4L80 3800 Torque Converter

REAR:
Fully Built Currie 9" with 3.73 street friendly gears

FORCED INDUCTION:
-Custom Twin Turbo with 67mm turbos, huge FMIC, Tial 44mm wastegates, Tial 50mm BOV, all black piping.

COMPUTER SYSTEM:
-Top of the Line Big Stuff 3 will control this beast. It has all data acqusition for tranny as well as motor.
-E Boost 2 boost guage

Thanks in advance guys.

Eric

[Zupercharged28]

ummm i think id definitley pass out behind the wheel of that monster because it would be soo insane. that or id just take off... iike spread my wings and fly. chitty-chitty-bang-bang style.

[Snigga]

How much are you getting it for? If you dont mind me asking.

[Grims]

He decided not to put it a fully built drive train in his car...why?

[SOMSS]

Wow that's gotta cost a pretty penny. I would say it's severe overkill for any street car. You will be traction limited around 500 RWHP. Oh yea, you are going to vaporize your stock rear end and drive shaft, so add another $3500 to replace those with appropriate parts.

[Transamman25]

More than anything .. this looks stupid fast .. until it blows .. secondly i wish i had 30,000 low side to do this set up

[ebaker]

He decided not to put it a fully built drive train in his car...why?

What do you mean??? It has a built currie 9" coming with it.

The setup with everything will hit me back a little over $30,000.

But im most likely going to get a black 98 WS6 trans am along with the setup that has a 6.0 with 6.0 heads and what not for around $7000. its a great deal and im glad he is willing to finance it to me. I plan on running low boost on the street and then bumping it up quite a bit when i go to the track.

[Grims]

What do you mean??? It has a built currie 9" coming with it.

The setup with everything will hit me back a little over $30,000.

But im most likely going to get a black 98 WS6 trans am along with the setup that has a 6.0 with 6.0 heads and what not for around $7000. its a great deal and im glad he is willing to finance it to me. I plan on running low boost on the street and then bumping it up quite a bit when i go to the track.

Like I said, your friend had the entire power train/drive train he had to of spent a fortune and a lot of research to accumulate all theses parts...why did he not use them?

[ebaker]

Like I said, your friend had the entire power train/drive train he had to of spent a fortune and a lot of research to accumulate all theses parts...why did he not use them?

ook i got you. He has three other cars other than the trans am he was going to put this in, and he is taking 18 hours in college and has no time to do anything with the setup, so he is going to sell it and then later on get back into building a better setup when he has more time.

[Grims]

3 cars and 30 grand worth of parts. For a college kid he aint do to bad is he.

[CamTom12]

sheesh, no kidding

Sounds like a crazy set-up... Wish I had 30k for parts!

[snakeoilperformance]

maybe he street races and makes money....... thats how i paid for all my quick cars i had.

altho i only own one now, and its a street car.. if i still owened the old s10 id probly be dead or in jail..

but damn did that thing make money

[Moparnos (The SLP Guy)]

sounds like a real nice combo