i did not expect this (help)

[LS1fishtail]

i changed my master cyl and slave. , put everything back together, and bled it by pushing on the slave rod and having the air bubbles come up through the resivoir. well when i went to pump the clutch, the pedal was spongy 3/4 of the way, and STIFF as hell the last 1/4 of the way. well when i went to the floorboard, i blew the slave seal underneath the rubber. not once, but twice! :mad:

does anyone know what went wrong?

they were all OEM parts.

[LS1fishtail]

i fixed it!

i had to use critical thinking

and a corona :lol:

[MJK]

i fixed it!

i had to use critical thinking

and a corona :lol:

I know this is an older thread but I just busted out laughing when I read that!!!!:lol:

I gotta remember that as I'm probably going to be tackling my master cyl this coming weekend...

So do you think a nice domestic beer would work just as well??:thumbsup:

[LS1fishtail]

just make sure you fill the slave up before putting the line on to bleed it (push back on the rod).

[taillights]

i was doing a slave cylinder querie and happened upon this
but do you think bud select would be good for replacing wires?
lite beer?