Welcome guests and new members

[Chris 96 WS6]

What sites are all you guys coming from? Post here if there's not a poll option for you.

[MotorBreathLT1]

the hideout :D

but im an abid member of cz28

[Chris 96 WS6]

but im an abid member of cz28

Me too, I have 4000 posts there since 1999.

[MotorBreathLT1]

Me too, I have 4000 posts there since 1999.


whats your username there? im chevyman502; i usualy screw around in the lounge the most and LT1 tech

[Chris 96 WS6]

whats your username there? im chevyman502; i usualy screw around in the lounge the most and LT1 tech

Same as here...I never go in the lounge though...

I don't go into LT1 tech much anymore either. If anything I'm in the 5th gen forum the most.

[F-Bobby]

i heard about it from loudmouthzls1. but im also on Cz28, ls1tech, f-body hideout, new england f-body, etc etc lol.

[loudmouthzls1]

i heard about it from loudmouthzls1. but im also on Cz28, ls1tech, f-body hideout, new england f-body, etc etc lol.

u should be a super forum mod haha .... i came from ls1 tech

[Vendetta]

Came from LS1TECH :)

[Acid Phreak]

Hideout. Same username there.

[Cory]

Hideout. Same username there.

Ditto :thumbsup: Whats up Acid?

[LiquidFire350]

LS1Tech, heard about here from baddogz28

[gettinthere]

LS1tech for me too. baddogz28

I'm also on chitownracing.com, chicagohp.com, ls1tech.com, borlacornertap.com, and I'm a mod on LS2.com.

[Phoenix57]

another 'tech guy here, same username. referred by badjuju. im also on LS7Power.com as well as a few small local ones

[Green95Z28]

From LS1tech.com. Same username there.... Heard about this place from Vendetta.

[GTP231]

Heard about this from Chris on Eastern F Body Association. I'm on Club GP godragracing.com nloc and couple of local boards

[99formulam6]

im frequent tech, and EFA. but im on dragva, cz28, racersden, corvettekillstories...what can i say, i dont do much work at work :D and i came here b/c of the referral thread started on tech.

[NviouSS]

i saw a link in get tint here's sig on a different forum.

[92LT1VETTE]

99formulam6 mentioned it in a post at Corvettekillstories.com, thanks 99 this is a cool site! :thumbsup:

[MillaTK]

Came here from LS1tech. Holla!

[Empire]

I cam from LS1.com which brought me to LS1tech.com which brought me to this site, so far I like this site the best, you all seem to be very helpful.

[Merling]

First time on a forum. Refered by a freind.
I have a 95 Z28 that has been pampered most her life.

[Jaberwaki]

welcome

[Iroc313]

I'm from LS1 tech badjuju told me about it

[chevy94c]

Camaroz28 and ls1tech

[Nautilus]

LS1tech...... Same username....

[ssweet97]

Just registered. Glad to be here. I own a '97 Camaro SS w/ an LT4 conversion.

[Jaberwaki]

howdy, nice to have ya

[snakeoilperformance]

linked from someone of GoDragRacing.com
that is another Very good forum i suggest you register, especialy if ya live in the delaware valley. good drag racing coverage and local coverage

[67RSSS]

Saw a link at LS1Tech. I'm Z-Convert on there, LT1Tech, CamaroSource and AZFBA.

[Iroc313]

Saw a link at LS1Tech. I'm Z-Convert on there, LT1Tech, CamaroSource and AZFBA.
hey AZFBA thats cool I'm part of it too nice to have some Az dudes on here :D


I think I've seen you before.........oh yeah you're that old dude yeah I know you know :lol:

[67RSSS]

hey AZFBA thats cool I'm part of it too nice to have some Az dudes on here :D


I think I've seen you before.........oh yeah you're that old dude yeah I know you know :lol:

*said in Rodney Dangerfield voice* I get no respect. All this from a KID who can't even drive yet :roflmao: . BTW, you've not seen me yet. You only know me from posting on the AZFBA boards. You may not know this yet but I will be Prez of the AZFBA after the next election. Are you gonna pony up the $$$ to join or doesn't the paper route pay enough :lol:

[Iroc313]

*said in Rodney Dangerfield voice* I get no respect. All this from a KID who can't even drive yet :roflmao: . BTW, you've not seen me yet. You only know me from posting on the AZFBA boards. You may not know this yet but I will be Prez of the AZFBA after the next election. Are you gonna pony up the $$$ to join or doesn't the paper route pay enough :lol:
you know what I meant ya smartass :) I'm going.....well I have to wait till I get my license before I can get membership, 20$ is alot for a kid who has no job ya know.

BTW I can drive ya know..........just now llegaly :D

[4348rd]

a link on TMCA

[Lights_Out]

I heard about this site from ls1.com

[lt1z28maro]

Saw a link on norcal-ls1.com

[BD3]

NE3G

[CamTom12]

Middle Tennessee F-Body Association :D

[Jrracing]

I just got on this site, I'm a fellow LS1 techer. And I found a link to hear from a freind(Capt.Insano).

[musclemac05]

F-Bodyhideout. of course :poke:

[GTP231]

linked from someone of GoDragRacing.com
that is another Very good forum i suggest you register, especialy if ya live in the delaware valley. good drag racing coverage and local coverageI second that site. Marc and the others do a very good job over there. GTP207 on there. Haven't been too active there since my car hasn't been running great most of the year :mad:

[macleod]

heard about this place on z28.com

[PontiacManDan]

I heard about this place from my brother.

[Firehawk 526]

FAOA forums...........Thanks for the invitation.

[Biff85ta]

Middle Tennessee F-Body Association :D

Ditto

['94 Z28]

I did a search for LT1 Performance.

[TheSilverSurfer]

Saw this on LS2--getinthere posted it.

[bbodycaprice]

i was looking up mods for a caprice and found it on google lol:lol:

[AF1Bird]

Hello,
I am a new member and glad to be a part of it. I am on a few boards and am always glad to find others to be a part of.

[philzz28]

heard about this place on z28.com

Same for me here.

[big block bob]

Howdy all, I came across this site by surfing for turbo info for my 93 TA.
In about a year, I'm tearing it down to make one bad ass street car. I've owned it for ten years, it has 97,000 miles, runs great, only a few minor problems and will still kick most Junkstangs asses! But it's getting wore out and I really like the car, so some time and money will be spent. I Love the looks of this car. Black on black, but the paints bad etc, etc. I'm in the process of recearching for the best H.P. parts. I don't like centrifical blowers, that's why I was looking into turbos, but I saw in here that drawing of the magnussan LT1 blower and really hope it's coming out! I asked them 5 years ago , and they had no plans at that time. So it's great to see so many people in here.;)

[ajsfirehawk]

I heard about it from my son. He is spent most of his time on thirdgen.com since we built his 85 Camaro from two cars, a 90 RS and an 85 TPI Z28. Added a 4 bolt main 350 with eagle rods, new heads, cam...we tore every nut and bolt off of it. I've got an 02 WS6 Trans Am M6 and just picked up a 97 Firehawk M6, #40 of 163. Before these I've had 3 other Camaro's and a 10th Anniversary TA

[Rick186]

Back in the GM garage after being fully Mopar-ized for many years.
Gave my big Dodge B250 RamWagon to my cousin's daughter's father-in-law (wotta mouthful) after he got hurt during retirement and his Ford Pickup crapped out. He does furniture refinishing to pick up extra change and my cousin's kids are really special.
Anyhow, since we have a PopUp RV, we needed a good tow vehicle so I lurked on eBay and found a 1995 Cadillac w/ the LT1 out of TX. No rust (CarFaxed, inspected, etc.) for our tow "truck."
It's got the 2.93 gears, HD cooling and trans cooler as standard, so that's why I'm here in addition to the web site over on the Cadillac site where the bunch, with the 94-96 Fleetwood Broughams are now talking about turning 13's in the quarter . . .STOCK!
Yes, they have photos, too.

[camaroman16]

I came from fbodyhideout.com.

[Grims]

Same as here...I never go in the lounge though...

I don't go into LT1 tech much anymore either. If anything I'm in the 5th gen forum the most.

The lounge there is the biggest drama fest I have ever seen. You say anything and you have 15 people dissecting it and nit picking it like crazy.

[1997lt1]

Anyone have a preference when it comes to what brand k-member or front control arms theyve used? UMI or BMR?

[Chris 96 WS6]

Anyone have a preference when it comes to what brand k-member or front control arms theyve used? UMI or BMR?

You need to start a new thread in an appropriate forum for that question.

[1997lt1]

hey everybody, new user, old trans am nut though. 1997 Lt1 t-56 t/a with spec stage 2 clutch, fidanza aluminum flywheel, slp shifter, all poly drivetrain mounts, bmr adj. torque arm, hotchkis rear susp., jet hot long tubes, slp loudmouth (no cats) fluidampr crank pulley, msd wires, ngk plugs, bbk 52 mm throttle body, trick flow elbow, granatelli maf, moroso cold intake, canton oil pan with hi flow and pressure melling oil pump. Want to see if people like tubular or boxed sfc's, and has anyone had better luck with "double diamond or straight connectors?

[RetroTA]

Did a search in Yahoo for "LT1 forum"
:cheers:

[Transamman25]

:roflmao: I did a google search for "awesome n Kicka$$" and it only returned one result ... LS1LT1.com .. :werd:

[Jimmy]

Hi,
Just joined tonight and having some problems posting. Anyway, I'm rodding a '37 Studebaker coupe express 1/2 ton. I just purchased a '96 caprice 5.7 LT1 from a salvage yard, and it's on the way to the local machine shop. Any, and all info I can get about this paticular powerplant would be greatly appreciated. Thanks, Jimmy

[CKJ]

Saw Jaberwaki post it on EFA quite a while back..

[lt1stroker]

Needing help posting threads.

[Chris 96 WS6]

Needing help posting threads.

Please post your problem in the suggestion box & site help subforum of this section. Probably...this is just a guess...you were unable to post anywhere but in here because you didn't have any posts yet. Now that you've made your post in this forum, you are free to use the rest of the site.

[96slow6]

Please post your problem in the suggestion box & site help subforum of this section. Probably...this is just a guess...you were unable to post anywhere but in here because you didn't have any posts yet. Now that you've made your post in this forum, you are free to use the rest of the site.
i pm'd him the same thing. hopefully he finds it.

[OEM_TA]

I found this site from a mention in the LT1edit.com message forum.

[Chris 96 WS6]

There's an LT1edit forum?

[96slow6]

lt1edit.com

[Chris 96 WS6]

Its not a forum, its a mailing list. I was on that for years and actually offered to host a forum for them here instead but most preferred the emails.

[96slow6]

i realy have no idea i was just teasing you from his post. :lol:

[OEM_TA]

Ok, I see now that I am going to have to be very precise with any posts I make here. :banghead:
Yes, it is a mailing list not a forum.
Sorry for the confusion.

[singeon123]

hi i really like this site they have a ton of info....i own a 97 ws6..flows,full msd,hurst shifter,bbk tb, edelbrock headers, forged pistons, ported heads

[White02SS]

I heard about this site when Black93Z posted on the WS6ZXR.com forums about that ricer lookin camaro... He posted a link to this site because there was a thread about it on here too.

[MetalRk_95TA]

Just joined today, thought I would say "Hey!"

[Chris 96 WS6]

Welcome!

[vicious6]

TurboBuick.com:thumbsup:

[96slow6]

Welcome.

[1badbeotch]

got here via cz28 looking for some lt1 hp upgrades...appears this site is the place to b 4 that...thanks james

[jr julien]

i found you guys on google where i was looking for a good site to get some feed back on a future project/daily driver car im going to build

[96slow6]

Welcome.

[Iceman20]

Hey guys, thanks for letting me be a part of this. I hope that I can learn a lot from you all and possibly impart what little knowledge I have along to others. I hope to consider you all friends and again thanks!!! Sorry I didn't follow the rules perfectly but I did post a thread elsewhere please view as I need a little info.

http://www.ls1lt1.com/forum/showthread.php?t=7869

[trkdrvremt]

Welcome:thumbsup:

[gvincent]

Did a search for LT1 info, came from HybridZ.org The fastest V8 powered non ricer little cars around!

[v90hamm77]

Cadilac Forums.Com

[v90hamm77]

What up fellas? I am a first time LT1 owner in a 96 Cadillac Fleetwood Brougham. I just bought it 3weeks ago it has 97,000 miles on it. The manual recommends changing the plugs at 100,000. Should I change the wires too?

[Chris 96 WS6]

What up fellas? I am a first time LT1 owner in a 96 Cadillac Fleetwood Brougham. I just bought it 3weeks ago it has 97,000 miles on it. The manual recommends changing the plugs at 100,000. Should I change the wires too?

Pls start a new thread for your question in one of the tech sections. Thanks! :LS1LT1flag:

[94whtTA]

i did a google search for the best lt1 forum on the web and it directed me here :LS1LT1flag: ;)

[dre422]

hi everybody this is my 1st forum join. hope to learn things and make some friends. I have a 95 caprice looking to do some minor mods to it;)

[Blakbird]

I'm a longtime member over at LS1tech.com. It does tend to get a bit "too big" at times and it's nice to be able to sorta relax with a smaller community from time to time. So I frequent a few other forums (including this one now) too.

[96slow6]

I'm a longtime member over at LS1tech.com. It does tend to get a bit "too big" at times and it's nice to be able to sorta relax with a smaller community from time to time. So I frequent a few other forums (including this one now) too.
That lingenfelter decal keeps making me drool.:drool:

[blacksmith]

i'm from Cz28 also and i use the same name there as well.

[96slow6]

Welcome.

[JB1969]

MTFBA.Noob there and here.

[94lt1t/a]

Found you guys through an internet search for info on my 93 TA

[96slow6]

Found you guys through an internet search for info on my 93 TA
Welcome. I got you all set.

[mod]

hey whats up i am mod "grims" little bro he told me to join. I have a 97 v6 camaro

[ws6_z28]

hey whats up i am mod "grims" little bro he told me to join. I have a 97 v6 camaro

Oh no a "mini me"....:lol: Welcome...:D

[Bustinrears95]

My name is Cryin' the blues and I drove a piece of f body...here me out!
I have a 95 lt1 w/ AFR heads, a comp cam, mac headers, a high flow cat,
flow master exhaust, heavy duty clutch, B & M short shifter, K & N air induction, Richmond 3.73's, tuned and dyno 328rwhp/319ft-lbs.
All in the almost 8 yrs I've owned it. It only has 73k miles
(I bought @ 16.7k / 1999)

Last week I had axle seals and rear brakes put on $300
I thought and even debated a 9" bolt in but thought I could squeak
a little more time out of these gears, I put them in last July (2nd time)

Yesterday...I put tires on it $450. It needed them because it has a tendency to spin the tires. Go figure?!

Tonight / Two hours ago...2nd time I've been to the track.
I was missing 2nd and grinding gears, with embarassing 60 ft times
ran 13's at 107...I'm leaving Cecil County (local 1/4 mile), low and behold
My rear was singin...if you've blown your rear you no that sound!

I just needed to vent...I went online found this forum...here I am.

Cryin' the blues!!

[95Z28]

I searched google for lt1 forums...

[Raptor285]

Heard about you guys (the second time, I forgot I was already a member, lol) on ClubGP.com, I'm on there all the time. Used to frequent the Hideout a lot and am on LS1.com sometimes :thumbsup:

[SCRMN99]

came from ls1.com and fquick

[1fast t/a]

IM NEW HERE SO BE GENTLE WITH ME IVE READ N HEARD ALOT ABOUT THIS SITE HOPE U GUYS CAN HELP ME OUT I GOTA 98 T/A LS1 CAR PROCHARGER LOTS OF OYHER BOLT ONS CARS WAS TUNED BY WTW FOR A 5 POUND PULLEY ON THE BLOWER CHANGED IT TO 8 LBS IM RUNNIN A TR-6 PLUG IN THE CAR THEY WANT ME TO CHANGE IT TO AUTO LITE PLUG AR-3993 JUST WONDERIN IF ANY 1 HAS DONE THIS OR SHOULD I STICK WITH THE NGK TR-6 ANT INPUT WOULD SURE HELP THANKS

[ws6_z28]

welcome everyone...:LS1LT1flag:

[USA1C5]

I'm new here. This is my first post. I found this site while looking for a Tuner. I was at http://www.carolinaautomasters.com/ when this site was mentioned. My two rides are a 2006 Corvette Z06 and a 1997 Corvette Coupe. LS7 and LS1. I live on western side of Virginia near Roanoke and looking for a Tuner near by maybe down in North Carolina or Virginia.

[retooferab]

:) Google

Water pump leaked, looked for help and found it here!
Thanks for the great site; it's an excellent resource. :thumbsup:

[dservati]

Heard about this place from the Impala SS Forum - LT1's and 2 tons of fun baby!!

[LT1Mario]

Ran across this site while trying to find some goodies for my LT1. I don't have a z or w(s6) for it, but I do have a few good choices to house it. 1971 Chevy CST-10 pick up, 1982 Buick Regal Limited (maybe not since I just dropped a 3.8 TURBO into it), 1986 Olds Cutlass Supreme Brougham, or my 1986 Buick Regal Limited <-- most likely candidate since it came with a v8 stock. I've also got a 1980 Buick Riviera TURBO that I'm considering selling (IMMACULATE CONDITION anyone know how much I can get for it? lol). I also bought a 1985 Chevy Monte Carlo for my son, soon after that we bought a 327 to drop into it but we can't seem to figure out what it came out of. I also have a 1977 Datsun 280z that my son has been nagging me to be the recipient of the LT1, he's crazy though!:homer:

[96slow6]

Cool. Welcome.

[sgstern]

Hello everyone, I have a 93 trans am and a 95 Camaro, both with LT-1. Camaro is Road Race car, TramsAm is road car for practice. Also have a 88 Camaro V-6 automatic and a 91 Camaro V-8 305 5-speed.;)

[96slow6]

Welcome.

[gvincent]

Your son is not so crazy on the Datsun 280Z with an LT1, very common and also LS1, Check out HybridZ.org for TONS of info on these very easy motor swaps for incredible fast and great handling cars.
Great help from very knowledgeable people and a great site, just search before asking.
Thanks,
Greg
1976 Datsun 280Z with LT1/T56

Ran across this site while trying to find some goodies for my LT1. I don't have a z or w(s6) for it, but I do have a few good choices to house it. 1971 Chevy CST-10 pick up, 1982 Buick Regal Limited (maybe not since I just dropped a 3.8 TURBO into it), 1986 Olds Cutlass Supreme Brougham, or my 1986 Buick Regal Limited <-- most likely candidate since it came with a v8 stock. I've also got a 1980 Buick Riviera TURBO that I'm considering selling (IMMACULATE CONDITION anyone know how much I can get for it? lol). I also bought a 1985 Chevy Monte Carlo for my son, soon after that we bought a 327 to drop into it but we can't seem to figure out what it came out of. I also have a 1977 Datsun 280z that my son has been nagging me to be the recipient of the LT1, he's crazy though!:homer:

[drsmtl]

Hi,
I followed a thread from clubhotrod.com. This is a real nice site and loaded with information. My son may not have sold his LT1 Vette if he had known of this site.

drsmtl
Bob

[coprunr]

i found this site following a tread on another forum while doing a general search on white 97SS cars.

[chevyh8tr]

Hey guys new to this and any forum for that matter just stumpled on well dont kill me yet for the name i'm a real ford guy but just bought a 97 ws 6 really like it it has a Golen stroked out LT1 w\ trick flow lt4 heads has all kinda bolt ons on it w\ 150 shot really havin alot of fun w\ the car. have no ? yet but just wanted to say wuz up w\ some LT1 guys

[DWM'S SS]

I'M NEW TO THIS COMPUTER STUFF, SO BEAR WITH ME. I OWN A 1996 CAMARO SS. HAD HEADERS MANUFACTURED FOR IT BY STAINLESS WORKS IN NORTHEAST OHIO.COMPUTER WAS FLASHED BY PCMFORLESS, FREE FLOWING CATS THROUGH SLP MUFFLER. ONLY OTHER MOD. IS AFE AIR FILTER.
LIVE IN NORTHEASTERN OHIO AND AM A MEMBER OF THE NORTHEASTERN OHIO CAMARO CLUB.

[Tims'96z28]

What sites are all you guys coming from? Post here if there's not a poll option for you.

I saw you on lt1 tech.com.

Tim

[clay1102]

I AM LOOKING FOR A 67 CAMARO WITH A AUTO TRANS, I LIVE IN NORTH CAROLINA , I WOULD LIKE AN RS. PLEASE EMAIL CBURTTS@EC.RR.COM OR CALL 910-577-3230.
THANKS CLAY

[96slow6]

I AM LOOKING FOR A 67 CAMARO WITH A AUTO TRANS, I LIVE IN NORTH CAROLINA , I WOULD LIKE AN RS. PLEASE EMAIL CBURTTS@EC.RR.COM OR CALL 910-577-3230.
THANKS CLAY
This is no the right place for this. But Welcome.

[ssean92]

z28.com

[Grims]

z28.com

...what about it?

[96slow6]

Thats how he found us.

[LOW-LIFE]

google search trying to figure out why my coolant fans wernt working.

[dover dawg]

Found this site via google search "fourth generation trans am forum"

[doclingenfelter]

Got here through a referal from fayettevillef-body. I can see why now. :D

[Mr.LeadFoot10]

Searching for turbo/ sc advice

[BrdwAtti2d]

Googling something, I don't remember what.

[wrnchbndr]

Hello everyone I found a link here from UMIperformance. I am currently building an 86-87 hybrid GTA. Lots of big plans in the works, now to scratch up the dough.

[96slow6]

Welcome. I am sure we can help you with your project if you need it.

[Packmule]

Came here from EPFBA. Have 2 3rd gens but just got my first 4th gen.

[ta97martin]

I actually didn't come from any other sites. I just got my first TA about a week or so ago and found this site on a yahoo search. Looked through some other forum sites but this one seems to be the best.

[Pheonix]

Google.

[Vtec_killa]

www.z28.com (http://www.z28.com)