Clutch bleeding helpbufmatmuslepants 12-21-2009, 05:03 PM Haynes manual's way of bleeding the clutch isnt how I think it is supposed to be done, Ive heard on here about some bleeder on top of the transmission, but I couldnt find it. Reason for bleeding the clutch is that when I hold in the petal for more than 3 seconds or so it loses pressure and stays on the floor or has no pressure anymore. If anyone knows what else this could be other than dirty nasty fluid please post. Thanks 2fast4u88 12-21-2009, 06:14 PM I believe yours don't have one if it is like the 95's. To bleed it you have to unhook the hose and get all the old fluid out. Then hook it back up. Feel the res full. Then lay under the car and keep pushing on the slave. Then check the level and keep doing it till it doesn't drop anymore. Then like another 20times for good measure. O major part you have to take the slave out of the tranny which isn't to hard. I would say the slave is leaking in the tranny though. bufmatmuslepants 12-21-2009, 07:59 PM Im gonna buy a new slave tomorrow and try bleeding it all out as that is my suspect also for bleeding by the seals Firehawk 12-22-2009, 02:10 AM def sounds like a bad slave bufmatmuslepants 12-30-2009, 06:55 PM changed the slave, problem remains. :banghead: | |