Window problem

[gielly44]

I just got my new '01 T/A WS6 and I'm having problems with the windows. When they roll up they lean towards the driver and start diggin into the rubber parts on the door and it's tearing my tint off. Is this a common problem considering there's no support when the windows come up? Any ways to quickly fix this??:dontknow: thanks

[gielly44]

Uhh yea, I noticed there's a few more people having this same problem on the site. So I read their's...:eureka: sorry!

[NviouSS]

only problem i had with mine is that the drivers side motor went bad. had that replaced under warrenty.

[WartHog]

You might want to check to make sure your window guides aren't broken. If you look down into the window when it is down, and look on the inside panel, you should see two metal u-shaped arms with felt on them about 1/3 of the way in from each side of the door. These keep your window from leaning in and ruining the rubber and tint. Both of mine were broken and I replaced them. Got them from the dealership and it was a pretty easy fix. They're adjustable so just take note of where the olds ones were and try to put the new ones on the same amount of space on each side of the screw.

Jim

[gielly44]

Mkay, I'll look into that and see if that helps. Thanks