671 BLOWN LT1 INSIDE! One question though.

[Bipolar]

Im wanting to do this with a small single carb blower & seeing how im all ready running a carb setup the only question I have is about the bolt pattern...What did this guy have to do to mate the blower manifold to the LT1 heads..How different is the bolt pattern from the LT1 heads and the old school heads? Go hear to read all about the only 671 blown LT1 I have ever seen..


http://users.senet.com.au/~tims/WebPage.html

http://users.senet.com.au/~tims/motor6.jpg

http://aussie-t.150m.com/motor8.jpg

[NXSLT1]

The two end bolt holes on both sides of the manifold are the same distance apart, the rest are differently spaced. They are all lower down on the head on the GEN1. If you want that setup on an LT1 then the best thing to do would be have yer LT1 heads redrilled for the old school bolt pattern. I'm pretty sure you'd have to weld up the original holes first.


I should have most if not all the machining done for my manifold here in just a couple hours (I'm taking a much needed break at the moment). I'll post up pics late tonight hopefully.

[Moparnos (The SLP Guy)]

your planing in using this blower on what car

[NXSLT1]

I take back what I said, with the 6-71 manifold there might be enough material on the manifold to just redrill it and that would definitely be easier than redrilling the heads.

[topendlt1]

I just about gave up hope until I seen that.

[Bipolar]

Why not just use the late model manifold that has the holes in the correct location. I myself will not using a 671 blower on anything, I'll be using this little guy..:thumbsup:

http://www.alsblowers.com/images/50_177_large_sdview.jpg

[Bipolar]

Modified LT1 intake.....

http://image22.webshots.com/23/2/45/71/231324571daLzAz_ph.jpg


http://image20.webshots.com/20/2/35/35/241923535ZwAOVx_ph.jpg

http://image30.webshots.com/31/2/32/48/231323248qWpvoP_ph.jpg

http://img.photobucket.com/albums/v448/boilrmkr/Blower/BOILRSSBlower02_01_052Sml.jpg

[NXSLT1]

Only one of yer pics work but if it's what I think it is then it's not a modified LT1 intake. It's a sweet custom sheetmetal intake made by MPE. It's a pretty tall setup, would be hard to get it under the hood or cowl of an F body.

[Bipolar]

Its cool, I do know that.

http://memimage.cardomain.net/member_images/12/web/2124000-2124999/2124841_49_full.jpg