orderd a dry kit

[loudmouthzls1]

like title says... i just ordered a dry kit with a 100 shot....was wondering wat RPM is it say to start sprayin at??? heard some people say at least above 2500 RPMS ?? anyone know the lowest point i can hit it ?

[LT1-TA]

i wouldn't spray below 3000 rpms unless you are running a progressive controller. Besides, there is no point in spraying below that. When your racing, from the get go you should be 3000+ rpms

[Moparnos (The SLP Guy)]

3k is where i hit it when i had my kit i used a timing tuner for this and maf translator to up the fuel. they worked great but now i have hptuners

[Capt. Insaino]

Yes 3k is where you want it to activate at. An A4 doesn't need a window switch, but its smart to have one just to be on the safe side.

[chevy94c]

Anthony don't spray below 3000 rpms. Also change the plugs too. Like NGK TR6 napa #4177. Thats what i am running. When you get your converter you should be all set.;) Have fun spraying:rockon:

Also DONT SPRAY threw gears. I found that out the hard way 1500 later. I would shut it off at 5800 rpms of so to be safe. JMO

[nostyta]

Like everyone else I don't spray below 3000rpms.

[Helmsdini]

you shouldnt wonder.. two words: window switch...

make sure you get one and it works correctly. I always ran mine from 3K-6K (rev limiter set at 6200)