TSP 233/239 113 R2, NA, Mustang dyno through a 9" and 4.71 gear, happy w/ results!

[baddogz28]

Did my first pulls since I had only boltons at Straightline Performance in New Lenox, IL. Thanks guys. I am really happy with what it put down. Here are the specifics of the pull:

*Only went to 6000 rpm because my injectors were above 101%, still pulling hard. After I get my injectors I'll be pulling to 6700.
*On a Mustang dyno (want my Dynojet #? Multiply by 1.07... 394)
*9" with 4.71 gear and spool.
*Pulls were made NA, no nitrous because the injectors were so overworked.

Car made 368 HP and 350 TQ at 6000 RPM.

The dynojet number should have been right around 394.

[gettinthere]

Not too bad, especially for shutting it down at 6000. Get those injectors in and head over to Outlaw. 2/26 3 pulls for $50.

[NBM2001z28]

Definately need those injectors - You can definately tell when you stop at like 6000 rpm and thats where the peak is and its not just barely climbing ;) i bet you see DAMN close to 400 with the injectors and underdrive pulley ;) We'll get ya back on there over at straightline and finish that tuning :)

[gettinthere]

Hell, I picked up 11 at the wheels just by swapping to 36# injectors.

[CamTom12]

Nice. I can't wait to see the updated numbers!

I'm up for an injector swap soon, also...

[baddogz28]

Thanks for the kind words guys. I'll keep you posted... I'll be getting a racetronix fuel pump and some 42lph injectors and then I should be set for a while till I have to get my Koni SA's, Brembo blanks, Auburn diff, and Hawk pads. Then I'm set until.... ? :devil:

[Jaberwaki]

great numbers for the rpm....
sounds like she would have put up 425+ at 6700

[NBM2001z28]

I'm glad you're happy with it chris - We need to get that gear out of your 9" and get the injectors and fuel pump back on so we can get her strapped back down.

[baddogz28]

Yeah, I'll be getting that stuff in the next couple weeks.

[Phoenix57]

nice numbers, especially with a 9in and only goin to 6k. what is ur raceweight wth that car?

[baddogz28]

Good question. Maybe 3350?

[Ωmega]

Those are some nice numbers for only running up to 6000!

4.71 gear??!??? :rockon:

[gettinthere]

weeeeeeeak

[LS13RDGEN]

:rockon:

[Jrracing]

Good #s. I'm going to a cam about that size, 234/242 and some ported 5.3's with a fast 90 setup. I'm hopeing for good results.

[CamTom12]

I did a log right before I took my 28.8's out...

130% duty cycle at 6350 :eek:

[gettinthere]

I did a log right before I took my 28.8's out...

130% duty cycle at 6350 :eek:


Hell, I've got you beat. 134%.

[Moparnos (The SLP Guy)]

hmm i need 28's

[gettinthere]

I can't find my old ones. I think they still might be at the old shop.