dub
06-08-2009, 10:08 PM
Remove the air fitting on the driver side exhaust manifold. I used a crescent wrench to get the top part of the fitting off. I don’t recommend this. I scratched my valve cover with the wrench. Instead, use the dremel tool to cut off the metal pipe close against the fitting so you can use the large ratchet with the 19mm socket to get the top fitting off. Once the top fitting is off, use the 1” socket to get the bottom one off the exhaust manifold.
Next, pull the air valve off the pipe that runs down on the drivers side.
Next, pull the air valve off the pipe that runs down on the drivers side.