What do you want to know about?

[gettinthere]

Some of the mods and myself are in the process of naking a bunch of write ups on various things to do with our cars. But we need to know what you want to know about! It can be anything from changing a tire to a heads and cam swap step by step walk thru.

So post up what you would like o know about. Or if you already have a write up and would like to have it used, you can PM it or email it to me. gettinthere@gmail.com

All of these would be compiled for our FAQ tech section.

-Brian

[Scott@DrivelineSolutions]

Hello Brian, I will be a sponsor in 2006 and I have a nice set of installation instructions for a 9" or 12 bolt swap on my site. I'm not trying to advertise but if you feel it's an intrusion then kill the link until I am in.

http://www.driveline-solutions.com/scart/agora.cgi?page=rearendinstall.html

[LearJet]

this is a dead link....

[Hamrhead]

How about a write up on shortening a rearend (9 inch or other) or what is involved in doing so? This is a common task for people who need big tires and want a deeper lip on their wheel.

[thompson]

hey i jus had a quick question.. im puttin new axles in my 97 trans am. is there anything i new to know about or watch out for

[03slowZ06]

New axle or Shafts?

[TheReginator]

Can I put the gears from a 93 firebird formula into a 95 base firebird rear end? Or should I just swap the whole thing?

[gibbcelt415]

I need a passenger side window motor saw a few in after market mags how hard is it to install ?

[TheReginator]

Its simple, all you do is drill out the rivets, there's a write up that I'll find for you that'll help. You just drill out half inch holes where the rivets are behing the fiberglass and the rivets are aluminum so they'll just melt once you get the bit on them. The hardest thing for me to do was plug the wiring harness back into the motor lol

[gibbcelt415]

Thanx for reply drilling I,m ok with do rivets need to be reused or new motor mount hardware supplied I have a rivet gun for sheetmetal work the electrical I hear ya basically quick connect plug motor getting slow gonna need it soon

[TheReginator]

http://shbox.com/page/windowmotor.html This is the link I used and followed the instructions and had a problem free smooth installation.

[gibbcelt415]

Thanx for the link really self explainatory passenger side motor says same gm part # gm motor only 1 year warranty and aftermarket lifetime you would think the opposite well not sure there what direction I want to go Ill assume more expensive motor last longer,thanks again for all your help .

[TheReginator]

Check E-bay I just bit the bullet and bought 2 new motors for $42 shipped! I'm to the point now where if these break I'm going to crank windows lol

[gibbcelt415]

Thanx for the info gonna try and wrench as much as I can save some greenbacks ! !