sbc into 95 TA

[ndevorak]

I have a built dual carb 350 and was thinking about putting it into the 95 TA. Are the mounts the same or will I need to replace the k-member?

[New 97SS]

BBC focused, but the parts list should be similar.

http://ls1tech.com/forums/showthread.php?t=618839

[sleepyTA]

It will drop right in, but if you are using a transmission other than a 4L60/700R4 then the crossmember won't work.

[ndevorak]

I plan on a TH400 and I have already got the brace from BMR. I just was unsre about the the motor since this is the first f-body I have messed with.

[sleepyTA]

Then your motor and transmission will bolt up. Are you using a lift to set the car down on the engine cradle/cross member?

[ndevorak]

I havn't started this project yet, I am just collecting all the parts needed. But yes I will be using a lift because I will be making other mods at the same time.

[five7kid]

It will drop right in...
After you chop up the firewall for the distributor.

[sleepyTA]

If he uses a small distributor and puts the motor in fromt he bottom he can.