Superchager Help please fellas !

[superbrowndude]

Hey fellas.I got a 95 regal series 1 3.8.I just bought a scrap 95 bonni sc 3.8.Can i transfer the blower to my reag safley,if i change the injectors,fuel pump,pressre regulator,and pcm with all the gaskets and stuff.Or will i just blow the motor in like 25,000km.Please help because i got them both apart already.Is there a difference in compression,if so how can i lower it,and the tranny should handle it,right ?
I have so far done a Maganflow cat back exhaust,MSD coil packs,Bosh wires,AcDelco plugs,and a cold air intake.Do you know of any companies that i can get a chip from for my series 1 3.8 ?

[94 Z28 w/issues]

im pretty sure you just cant put that supercharger on there, i think you gotta change out the heads to

[sphinx_57]

It sounds like you have everything covered for the most part, I thought I heard once that it wouldn't work, but hey try bolting them up and go from there.

[GTP231]

I know on the Series 2 cars you'd be set. I'm imagining that the Series 1 stuff should all swap over between the 2. As mentioned earlier you'll prolly have to swap the heads out. Swapping the pcms and harnesses will make it a lot easier also