Couple Questions

[MTBSully]

I finally got both of my Hooker LT headers in and now i'm starting to get things back together. First question, I undid the drivers side motor mount and jacked up that side a few inches, and a bunch of coolant came out from ( i think) the hole in the block that the motor mount bolt goes into or this general area. is this normal? Second, now that i have the motor back down, only the bolt farthest to the back lines up. The other two, it seems like the motor isn't settled down enough. Anybody else have this problem? Secondly, I'm making my own o2 extensions, and the wire in the o2's is silver while the wire that i am using is copper. Does anyone see any problems with this? Thanks guys

[LOW-LIFE]

when ,aking o2 extensions espically when splicing and soldering the resistances through the wire can and will change and will alter what you computer is reading which will alter fuel. how much tho, i have no idea.

so kinda off topic but what did u do with your shorties?:rolleyes:
and why di you decide to change?

[g9m3c]

There are coolant access holes sorta back and down from the motor mount holes. The knock sensor will be in one of these holes, I believe the passenger side. The driver's side is just a pipe thread plug I think. So unless you took one of those loose, I dunno where the coolant came from.