PDA

View Full Version : Low 11's for me

UDIDNNO
10-31-2005, 02:20 PM
I have a 1994 TA with a 396 stroker kit. The car has run it's best pass of 11.26@120.64mph at Milan Dragway on Oct 27th. The car still has stock LT1 heads(unported) with 2.00/1.600 valves, and intake with a 52mm throttle body. This pass was made on 150 shot of nitrous. All motor it runs 12.13@115mph. It has a 4L60E tranny, Moser 12-bolt w/3.73 gears, and running M/T ET Streets. Next year i'm looking for 10's with ported heads and intake.
Chris 96 WS6
10-31-2005, 02:33 PM
What cam are you running?
Fastbird
10-31-2005, 06:23 PM
What cam and why in the WORLD are you running a 396 with unported LT1 castings???
BRUTL TA
10-31-2005, 07:09 PM
The heads must have some work done to them in order the larger valves.
Fastbird
10-31-2005, 10:22 PM
The heads must have some work done to them in order the larger valves.

I think just a valve job would take care of that. A 2.00/1.56 goes right in without issues with seating properly on the stock LT1 valve seats.
UDIDNNO
11-01-2005, 11:16 AM
I'm using a CompCam 305 camshaft, .510/.510 lift, 220/230 duration @ .050, and with 1.6 roller rockers.
UDIDNNO
11-01-2005, 11:23 AM
I'm running unported heads to test their limits. Besides, people told me the car wouldn't run that fast. I guess I proved them wrong. Next year I'll have my new ported heads and a better cam. I'm going on the Power Tour again in 2006 and have some fun on the highway and at the track.