Can u put a 4 speed in 1995 LT1

[lockdun1]

i want to put a manual in 1995 Z28 But i want a 4 speed will it work want do i need to make it work.

[NXSLT1]

If the bolt pattern for the bellhousing matches up then I don't see why not. I'm sure someone makes a bellhousing that would allow the swap. Might have trouble getting the shifter where you want it though.

[Chris 96 WS6]

Considering the LT1 uses the same bellhousing pattern as all traditional small block Chevys, it should bolt right up.

[1970judge]

Quick questions...why?

[4348rd]

i want to put a manual in 1995 Z28 But i want a 4 speed will it work want do i need to make it work.
yes but you will need a hydrolic bellhousing to fit the 4 speed and pedals of of a 4th gen and modiacations to the cross member

[Jaberwaki]

Quick questions...why?

X 2

why would you go backwards ??? :dontknow:
the T-56 tranny is one of the best manual trannys that gm has made, slappng the viper internals makes them pretty much bullet proof(taken deep in the nines)
the first 4 gears are close ratio (just like the 4 speed) but on top of that you get 2 over drives to get you to and from the track....

T-56 > 4speed