PDA

View Full Version : Installing new gears.

keliente
10-02-2005, 12:08 AM
Today I installed some 3.73's in a certain formula...I took some pix & did a small write up to help people decide if they can do this themselves, or need to have a shop do it.

http://www.keliente.com/gears.htm
smoknta
10-02-2005, 10:41 AM
Nice write up....I think it would really help to have pics of measuring backlash and a correct gear mesh pattern. If you have not done it before, it may not make any sense to some people. Good job though.
gettinthere
10-02-2005, 05:50 PM
Very good write up. I'll make this a sticky.
Fastbird
10-02-2005, 06:22 PM
Very nice!!!!!
Chris 96 WS6
10-03-2005, 03:54 PM
Good job!!!
tbojbob
10-05-2005, 12:56 AM
This should be put into the "Timeless Classics" section..... Bravo! :thumbsup:
DeMasi1990
11-28-2007, 11:42 AM
Very deatailed,


I found this In search of rebuilding my Rear, But....Without a lift, I dont know If Id want to tackle a Job like that on the ground..:thumbsup:
New 97SS
04-12-2008, 07:34 PM
That is about as detailed as it gets. I am considering doing my rear, and that just made me feel pretty confident that I can do it. I just need the pullers/installers for the bearings and races, as I imagine that makes life much simpler.

AWESOME Write-up.